Your marble, polished back to a reflection.

Marble polishing and stone restoration across Sydney. Etch marks, scratches and dull patches honed out, polished and sealed where the stone sits.

  • Fully insured
  • Quality guaranteed
  • Free on-site consultation
  • Australian owned
  • Products meet Australian Standards
  • Free quote from a photo
The black and gold marble island before: grey, hazy and etched with pale rings. The same island from the same spot after polishing: deep black, reflecting the window.

Same island, same angle.

Lemon, wine and the wrong cleaner had etched rings into the top. We honed them out, polished it back to black and sealed it.

See the stone come back.

Our own jobs, each told as it went: before, during and after. Marble, granite, terrazzo, limestone and travertine.

Worn rose marble hallway(Before)

Stone like this? Get a free quote

What we polish, fix and seal.

Marble polishing, stone restoration and sealing across Sydney, in homes, apartments and strata buildings. Pick what you have and we’ll start your quote with it.

We work across all of Sydney. See the areas we cover.

Get a free quote

From a photo to polished stone.

  1. A rose marble hallway floor before polishing: dull, with white marks and the machine lead across it

    Send us a photo.

    Add it to the form below: the whole surface, then the damage up close.

  2. The floor machine waiting in a white marble foyer

    Get your free quote.

    We price it from your photos. If we need a closer look, we come out first, at no cost.

  3. Two machines working on a travertine terrace by the water

    We polish it where it is.

    Honed, polished and sealed on site, where the stone sits. Quality guaranteed.

Before you send a photo.

How much will it cost?

Each job is priced on its own: the stone, the area and how deep the damage goes. Send photos and a rough size and we’ll quote free. If photos can’t tell us enough, we visit at no cost.

Can etch marks from lemon or wine come out?

Yes. Acid dissolves a thin layer of marble and leaves a dull mark. We hone below the mark, then polish the stone back up to match. A deep etch can need extra passes.

Is it messy?

Honing and polishing are done wet, so the work makes a slurry rather than dust. Tell us what sits around the stone when you send photos, and we’ll plan for it.

A black marble bench mid-polish: the slurry stays on the stone and drop sheets cover the floor
Can you get stains out of marble?

Often. Many stains can be drawn out of the stone; some, like old rust or oil, only lighten. Send a photo and we’ll tell you what to expect before any work starts.

Do you repair chips and cracks?

Yes. We fill them with a colour-matched resin, then hone the repair flush and polish it with the stone around it. A filled crack can still be seen up close, but it is smooth and sealed.

A stone island with its chips filled, ready to hone flush
Honed or polished: which should I choose?

Polished stone reflects light and shows its colour; honed stone is matte and hides etch marks and scratches better. We can finish to either; tell us the look you want.

Two different jobs side by side: honed travertine on the left, polished black marble on the right
Will sealing stop it happening again?

A sealer makes stone slower to stain. It doesn’t protect marble from acid, so lemon, wine and vinegar still need wiping up straight away.

Do you work on stone other than marble?

Yes: granite, terrazzo, limestone, travertine and sandstone, plus concrete floors and porcelain tile and grout, on benchtops, vanities, floors, stairs, showers, tables and outdoor areas.

A travertine balcony, honed and sealed
Do you take on trade work?

Yes. We work on site for builders, designers and strata managers as well as homeowners.

A stone entry in a new build, polished

Marble polishing across all of Sydney.

We come to the stone, wherever it is in Sydney: homes, apartments and strata buildings. These are the regions, and some of the suburbs, we cover.

A travertine terrace and pool above the water, polished on site

City and inner Sydney

Sydney CBD, Pyrmont, Surry Hills, Darlinghurst, Potts Point.

Eastern Suburbs

Bondi, Double Bay, Paddington, Vaucluse, Randwick.

Inner West

Balmain, Leichhardt, Newtown, Drummoyne, Strathfield.

Lower North Shore

North Sydney, Mosman, Neutral Bay, Lane Cove, Chatswood.

Upper North Shore

Lindfield, Gordon, Pymble, Wahroonga, St Ives.

Northern Beaches

Manly, Dee Why, Mona Vale, Avalon, Palm Beach.

Hills District

Castle Hill, Baulkham Hills, Kellyville, Bella Vista, Dural.

Ryde and Parramatta

Ryde, Epping, Eastwood, Rhodes, Parramatta.

Western Sydney

Blacktown, Seven Hills, Rooty Hill, St Marys, Penrith.

South West Sydney

Bankstown, Fairfield, Liverpool, Campbelltown, Camden.

St George

Hurstville, Kogarah, Rockdale, Bexley, Sans Souci.

Sutherland Shire

Cronulla, Sutherland, Miranda, Caringbah, Engadine.

Not on the list? If it is in Sydney, we cover it.

Get a free quote

Send a photo. Get a free quote.

Add a photo and your details, and we’ll come back to you with a price.

Photos of the stone

No photos to hand? Send the form anyway and we’ll call you.

Add details Optional

We use your details only to quote for this job.

  • Marble, granite, terrazzo, limestone and travertine
  • Homes, apartments, strata and trade
  • Polished in place, on site
  • Quality guaranteed